Invisible fence Dogtrace d-fence 202 white
It is a unique way to define the dog's movement on the property using a warning
and correction zone. Can be used for plots up to 2200 m in circumference.
Long-term Unavailable
€ 200.0
- Warranty:
- 24 Months
- Manufacturer:
- Dogtrace
- EAN:
- 8595221008055
- Item ID:
- DG222
Similar Products
Experts on Airguns, Archery, Hunting and Outdoor Gear 100% Warranty of Satisfactory Purchase
PRODUCT DESCRIPTION
Dogtrace d-fence 202 is an improved version of the invisible fence. It represents a unique way to limit the dog's movement on the property. It will only move freely in areas where it is not in danger or where it cannot cause any damage. It consists of a transmitting generator with a backup battery, a receiver and a antenna. This is a simple insulated wire. The antenna wire must be purchased separately for this product.
The Generator sends a signal to the antenna wire, which you use to delineate the selected area with a alert and correction zone. Thanks to the battery, the generator can operate even in the event of a power failure, for up to 16 hours. The receiver attached to the dog's collar senses the signal propagating from the installed antenna wire. If the dog crosses the alert zone, the collar will emit an intermittent sound signal. If the dog does not respond to the audible warning and also crosses the correction zone, the collar shall simultaneously emit an audible signal and a correction pulse. You can easily adjust the intensity of the correction pulse as well as the width of the correction and warning zones.
The number of dogs with the receiver attached to the collar is not limited. The collar is compact and waterproof and due to its light weight and ergonomic design it is suitable for all breeds of dogs. The kit is suitable for installation up to a wire length of 2200 m. For different lengths, the appropriate cross-section of the antenna wire must be selected.
The device can be used for any type of terrain and its installation is very simple. For the invisible fence system to work, you must connect the wire to the transmitter and create an unbroken loop of wire (avoid damaging it). From the transmitter, unwind the wire around the property. You can lay the wire on the ground, bury it underground (up to 10 cm deep) or attach it to an existing fence or wall (up to 30 cm above the ground).
You can also buy additional packs of the aerial wire and connect it with notch connectors. If you want the dog to be able to walk freely through a certain spot on the property where you have to run the wire, wind the outgoing wire around the incoming wire. Twisting the wires around will cancel out the signal and the dog will not pass that way.
Main Benefits
- length of the aerial wire up to 2200 m
- backup battery capable of powering the system for up to 16 hours in case of a power failure
- you can keep any number of dogs in the defined area
- easy and quick installation (functional within an hour)
- cheap and very variable option for fencing the property
- the fence is "invisible", does not interfere with the view of the surroundings
- can complement the existing fence, which the dog still overcomes
Package contents
- Generator with battery 9,6 V (white)
- Power adapter
- Magnet with lanyard
- Notch connectors 2 pcs
- Receiver with woven strap (75 cm)
- Electrodes 12 and 17 mm
- Lithium battery CR2 3V
- Test glowing glove
- DVD instructions
- Antenna connector
- Plastic dowels (2 pcs) and screws (2 pcs) for fixing the transmitter generator to the wall
Parameters
- Manufacturer:
- Dogtrace
- For Breeds:
- All
- Collar Type:
- Electric
- Length (cm):
- 75 cm
- Collar Function:
- Impulse and Vibrations
- Warranty:
- 24 Months
We also recommend buying (1)
Customer Reviews (0)
Be the first one to rate this product and help others decide.
By submitting your review, you are agreeing to our review guidelines. It will be published once we make sure it corresponds with our terms and conditions.