Firearm Accessories page 7 from 36

1x

Service kit for Glock 17 Gen5 diabolo 4.5 mm magazine. The set includes 2× O-ring, ammo belt, 2× valve seals, tip seal and magazine catch spring.

3 pcs in stock, estimated delivery: July 29 - August 3.

$ 17.6

2x

This service kit for the Umarex T4E HDS 68 RAM shotgun contains replacement seals and a complete CO2 cartridge piercing unit.

2 pcs in stock, estimated delivery: July 29 - August 3.

$ 26.3

1x

This is a paper target with a duck silhouette. In addition to four ducks, there are also four smaller round targets on the sheet. It is ideal for use at shooting ranges.

1 pcs in stock, estimated delivery: July 29 - August 3.

$ 2.6

1x

Target with an image of a single figure, divided into sections with different point values. Target dimensions are 84×59 cm.

9 pcs in stock, estimated delivery: July 29 - August 3.

$ 15.8

Complete set of all sealing O-rings for FX DRS air rifles in calibres 5.5 mm and 6.35 mm.

33 pcs in stock, estimated delivery: July 29 - August 3.

$ 33.4

8x

Nylon holster from a Czech manufacturer. Suitable for both right-handed and left-handed users. This holster has an integrated magazine pouch.

5 pcs in stock, estimated delivery: July 29 - August 3.

$ 16.1

3x

Drying filter with one spare filling kit for HILL EC-3000 EVO compressor. The manufacturer recommends replacement every 3 months or after every 10 hours of operation.

12 pcs in stock, estimated delivery: July 29 - August 3.

$ 127.3

2×

3x

Donny FL TANTO is a compact sound moderator for PCP air rifles in calibres 4.5 – 5.5 mm. It is compatible with 1/2×20 UNF thread.

11 pcs in stock, estimated delivery: July 29 - August 3.

$ 107.1

2x

Standard pressure hose for PCP hand pumps (Hill, FX etc.) with 1/8 BSP external thread and a total length of 450 mm.

9 pcs in stock, estimated delivery: July 29 - August 3.

$ 18.4

2x

Spare spring for break‑barrel air rifles Kral Arms. Designed for models N-01/05/06/08/12. Version with energy up to 16 J.

> 100 pcs in stock, estimated delivery: July 29 - August 3.

$ 10.9

3x

You can attach this adapter with Picatinny rail to the KeyMod handguard of the AirMaks Katran PCP air rifle.

3 pcs in stock, estimated delivery: July 29 - August 3.

$ 18.4

4x

Replacement seal kit.

29 pcs in stock, estimated delivery: July 29 - August 3.

$ 7.5

Compressor with filling pressure up to 310 bar, ideal for anyone who wants to be 100% self-sufficient in filling PCP air rifles.

9 pcs in stock, estimated delivery: July 29 - August 3.

$ 1 126.6

1x

Spare magazine for the RAM pistol Umarex T4E Smith&Wesson M&P9c M2.0 cal. 43. Magazine capacity is 8 rounds.

7 pcs in stock, estimated delivery: July 29 - August 3.

$ 48.5

2x

Magazine for the Umarex Walther PPQ M2 T4E RAM pistol with a quick-piercing CO₂ cartridge valve. Enables rapid use of the weapon for self-defence.

7 pcs in stock, estimated delivery: July 29 - August 3.

$ 71.0

2×

4x

This sound moderator is even quieter than the SUMO version and its overall length is 20 cm. It is designed for PCP air rifles in calibres from 6.35 mm to 7.62 mm.

18 pcs in stock, estimated delivery: July 29 - August 3.

$ 195.0

2×

2x

Donny FL TANTO is a compact sound moderator for airguns in calibers 6.35 – 7.62 mm. It is compatible with 1/2×20 UNF thread.

19 pcs in stock, estimated delivery: July 29 - August 3.

$ 107.1

2×

Tatsu is ideal for those looking for a compact yet extremely effective moderator. It is a smaller version of the popular Sumo moderator. At its end there is an end cap with a 1/2×20 UNF thread.

10 pcs in stock, estimated delivery: July 29 - August 3.

$ 129.2

Service kit for maintenance of the magazine for the RAM pistol Umarex T4E Glock 17 Gen5 cal .43, which includes the magazine base plate seal, rear seal, rear and front covers of the magazine screws, replacement tightening screw, plastic base cover, and impact pin seal.

4 pcs in stock, estimated delivery: July 29 - August 3.

$ 24.8

3x

Small Venox DB-2 drying filter designed for Venox Pocket Air CS1-I and Venox 12V compressors. Inside its metal housing there is a foam filling.

> 50 pcs in stock, estimated delivery: July 29 - August 3.

$ 30.4

3x

Replacement absorbent cartridges for the Venox DB-2 (F25) drying filter. One package contains 25 pieces.

41 pcs in stock, estimated delivery: July 29 - August 3.

$ 4.1

2×

4x

Tuning adapter for the Taipan SLASH air rifle allowing the installation of an external sound moderator with a 1/2×20 UNF thread.

7 pcs in stock, estimated delivery: July 29 - August 3.

$ 56.0

Replacement for the original power plenum with recessed regulated pressure gauge for Taipan SLASH air rifles.

> 100 pcs in stock, estimated delivery: July 29 - August 3.

$ 74.8

11x

This is a bipod made of aluminium alloy with telescopic legs and a maximum length of 37 cm. You attach the rifle to an adapter for an 11 mm or 22 mm mounting rail.

46 pcs in stock, estimated delivery: July 29 - August 3.

$ 48.5

This boresnake is suitable for cleaning 8 mm and .32 caliber firearms. It should be included in every gun cleaning kit.

48 pcs in stock, estimated delivery: July 29 - August 3.

$ 8.6

2x

Spare check valve set for Hill MK5 hand pump.

30 pcs in stock, estimated delivery: July 29 - August 3.

$ 7.1

3x

Spare magazine designed for FX DRS air rifles. Thanks to its compact dimensions, most low scope mounts can be attached to the air rifle.

7 pcs in stock, estimated delivery: July 29 - August 3.

$ 56.0

2×

1x

Tatsu is ideal for those looking for a compact yet exceptionally effective moderator. It is a smaller version of the popular Sumo moderator. At its end there is an end cap with a 1/2×20 UNF thread.

19 pcs in stock, estimated delivery: July 29 - August 3.

$ 129.2

Spare parts kit for the Umarex T4E TB 68 / HDB 68 2nd generation RAM shotgun. Includes a valve (CO2 cartridge piercer), sealing O-rings, and a trigger mechanism spring.

1 pcs in stock, estimated delivery: July 29 - August 3.

$ 25.9

2×

1x

Adapter enabling the installation of a sound moderator with 1/2 UNF thread on the SPA Snowpeak PP750 air pistol.

11 pcs in stock, estimated delivery: July 29 - August 3.

$ 27.0

1x

Adapter for manometer with angled filling pin allowing shooting with a connected pressure bottle (tethering).

> 50 pcs in stock, estimated delivery: July 29 - August 3.

$ 74.8

Cord suitable for cleaning all rifles in 9 mm caliber. Cleaning with the cord is very easy and fast.

> 50 pcs in stock, estimated delivery: July 29 - August 3.

$ 8.6

2x

Nylon holster from a Czech manufacturer. Suitable for both right- and left-handed users. Adjustable side straps prevent the weapon from accidentally falling out.

2 pcs in stock, estimated delivery: July 29 - August 3.

$ 15.0

Earmor MaxDefence M01 earplugs made of shape-adaptive and easily washable polyurethane foam provide hearing protection at the level of 33 dB.

13 pcs in stock, estimated delivery: July 29 - August 3.

$ 0.5

3x

Large case suitable in size for shorter rifles. The case is black and lined with a foam insert. Equipped with a combination lock.

5 pcs in stock, estimated delivery: July 29 - August 3.

$ 52.2

1x

Tool for harmonic tuning adjustment (tightening / loosening the end parts of the barrel shroud) of Epic ONE and Epic TWO air rifles.

6 pcs in stock, estimated delivery: July 29 - August 3.

$ 29.7