Gun Accessories page 17 from 22

1x

The spare durable magazine for Effecto Zeon air rifle can store ten .25 / 6.35mm calibre pellets.

5 pcs in stock, estimated delivery: July 16 - 20.

$ 37.2

Air cartridge made of carbon fibres with a capacity of 580 cc and a maximum working pressure of 300 bar compatible with Epic Airguns models in the CFB version.

4 pcs in stock, estimated delivery: July 16 - 20.

$ 279.9

1x

Folding stock adapter for EPIC TWO airguns. The joint allows you to fold the stock of the weapon for easier transport or storage. A locking system is included to keep the folded stock securely in place.

6 pcs in stock, estimated delivery: July 16 - 20.

$ 108.9

This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for the Evanix Air Speed PCP air rifle in .177 (4,5 mm) and .22 (5,5 mm). It will allow you to get much more consistent performance and improved accuracy.

1 pcs in stock, estimated delivery: July 16 - 20.

$ 104.8

The tuning regulator for the Evanix Airspeed in 6.35 mm / .25 calibre offers long-term shot consistency, but it is recommended to maintain a time gap of about 3–4 seconds between the shots. The pressure is adjustable in the range of 90–170 bar.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 101.1

This spare air cylinder is designed for the Evanix Cloud Ultra PCP air rifle.

5 pcs in stock, estimated delivery: July 16 - 20.

$ 259.2

This carbon fiber bottle is designed for the Evanix REX-FA and IBEX PCP air rifles. It has a capacity of 480 ccm and you can check the current pressure on the pressure gauge on the top of the valve. The outer surface of the bottle is covered by a synthetic buttstock with a buttpad.

7 pcs in stock, estimated delivery: July 16 - 20.

$ 450.4

The external regulator for Airgun Technology Uragan third generation air rifles serves as a direct replacement for the factory regulator and allows external pressure adjustment in the range of 100–200 bars.

1 pcs in stock, estimated delivery: July 16 - 20.

$ 124.9

FX Airguns adapter allowing the use of FX Airguns air bottles on AGN Vulcan 3 air rifles. Additionally, thanks to the presence of a check valve, there is no air loss when replacing them.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 33.4

This carbon fiber air cylinder is designed for FX Impact M3, FX Crown, FX Royale and FX Dreamline (adapter needed) PCP air rifles. It has a capacity of 300cc and 300bar working pressure.

5 pcs in stock, estimated delivery: July 16 - 20.

$ 315.6

Replacement Power Plenum HP (High-Power) for FX DRS air rifles with barrel lengths of 500 mm and 600 mm.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 89.8

A tuning cheekpiece designed for FX Impact, Impact MkII, and Impact M3 air rifles, allowing comfortable shooting for both right-handed and left-handed shooters.

3 pcs in stock, estimated delivery: July 16 - 20.

$ 47.3

Conversion kit enabling the use of high capacity Hi-Cap Side Shot magazines in FX Impact air rifles (pre-MkII versions).

2 pcs in stock, estimated delivery: July 16 - 20.

$ 29.7

This kit will allow you to attach the side lever to the left or right side of the rifle. This will make your FX Impact fully ambidextrous. The kit is compatible with FX Impact MKI, MKII and M3.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 152.9

This spare aluminium magazine is designed for the first generation of FX Impact PCP air rifles. It has a capacity of eighteen .22 caliber (5,5 mm) pellets.

12 pcs in stock, estimated delivery: July 16 - 20.

$ 65.7

This Nielsen pellet probe was designed for the FX Impact PCP air rifle in .25 caliber (6,35 mm).

1 pcs in stock, estimated delivery: July 16 - 20.

$ 32.6

Hinged joint allowing you to install any AR-type stock onto your FX Panthera airgun (version with underbarrel cartridge).

19 pcs in stock, estimated delivery: July 16 - 20.

$ 71.0

FX weight with a length of 90 mm and a weight of 250 g for mounting on barrels of FX air rifles Panthera, Dynamic, and King. Two hex screws are used to secure it.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 29.7

FX STX Superior is the successor of the FX STX Liner Slug A series of spare barrel liners. This is the Heavy version and it has a special twist rate which was especially designed for heavy pellets and slugs.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 106.7

FX STX Superior is the successor of the FX STX Liner Slug A series of spare barrel liners. This is the Standard version and it has a special twist rate which was especially designed for standard pellets and lighter slugs.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 108.6

The spare FX STX Tube for the FX Wildcat MKII PCP air rifle in .22 caliber (5,5 mm).

1 pcs in stock, estimated delivery: July 16 - 20.

$ 262.6

Tuning power plenum with increased volume of 30cc allowing your FX Wildcat airgun to achieve better performance.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 28.2

Filling probe enabling filling of FX MK1 PCP rifles, but it can also be used with other FX air rifles with a standard quickfill port. The external 1/8 BSP thread allows connection to a standard hose from a cylinder, pump, or compressor.

1 pcs in stock, estimated delivery: July 16 - 20.

$ 25.9

Folding stock adaptor for the tactical configuration of the FX Dreamline air rifle. Improves portability and maintains a stable connection between the stock and the weapon body.

11 pcs in stock, estimated delivery: July 16 - 20.

$ 86.0

A spare magazine for the Game Face Trion dart blaster. This model can hold up to 15 Game Face Pro foam darts. It has a transparent side so you can easily find out how many rounds you’ve got left.

22 pcs in stock, estimated delivery: July 16 - 20.

$ 22.2

1x

Spare grip for CO2 air pistol SPA CP2 with a camouflage pattern.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 18.4

Spare grip for PCP air rifle M50 from a Chinese manufacturer SPA.

1 pcs in stock, estimated delivery: July 16 - 20.

$ 22.2

High-quality guncover with straps for comfortable carrying on the back. Can be laid out and used as a shooting mat.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 232.9

High-quality extra-long rifle cover with straps for carrying on the back. Can be laid out and used as a shooting mat.

3 pcs in stock, estimated delivery: July 16 - 20.

$ 465.8

High-quality guncover for safe transport of your Field Target rifle with non-standard total height.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 184.1

High-quality guncover with shoulder straps for comfortable carrying of a long rifle on the back. Includes a number of smaller compartments with reliable YKK zippers.

2 pcs in stock, estimated delivery: July 16 - 20.

$ 326.8

HB-3 Adapter for Harris bipod allows mounting bipod on a Remington 4/74/7400. Material: Steel

1 pcs in stock, estimated delivery: July 16 - 20.

$ 37.2

HB-9 Adapter for Harris bipod allows mounting bipod on a thin forestock. Material: Steel

1 pcs in stock, estimated delivery: July 16 - 20.

$ 30.4

Hatsan Vortex Gas Piston Type 4 can be used to replace the regular spring piston on Hatsan air rifles. With this model you can expect more manageable recoil, much less noise and you can shoot more smoothly and comfortably.

6 pcs in stock, estimated delivery: July 16 - 20.

$ 37.5

Hatsan Vortex Gas Piston Type 5 will give you more stable performance and increase the lifespan of your airgun. It can be used to replace the regular spring piston on Hatsan air rifles.

3 pcs in stock, estimated delivery: July 16 - 20.

$ 37.5

The high flow tuning pellet probe with a pin tip is designed for FX DRS air rifles and allows for maximum airflow. It is suitable for both slugs and pellets.

1 pcs in stock, estimated delivery: July 16 - 20.

$ 26.3