Gun Accessories page 6 from 36

8x

This padded case will keep your CZ airsoft pistol safe. It is made from scratch-resistant plastic and features the CZ logo. This padded case will keep your CZ airsoft pistol safe. It is made from scratch-resistant plastic and features the CZ logo.

5 pcs in stock, estimated delivery: July 22 - 27.

$ 25.9

2x

This package contains 10 sheets with Daisy Shoot NC splatter targets. You’ll get 110 targets in total (7,5 cm targets – 20pcs, 5 cm targets – 30pcs, 2,5 cm targets – 60pcs). The pellet impact will produce a coloured ring around its edges.

32 pcs in stock, estimated delivery: July 22 - 27.

$ 9.4

Spare filling probe for Kral Arms PCP air rifles. This model is inserted into the air cylinder and has a 1/8" BSP (male) thread.

25 pcs in stock, estimated delivery: July 22 - 27.

$ 18.4

The spare magazine for the Umarex T4E Walther PPQ M2 RAM pistol. It has a capacity of eight .43 caliber rubber projectiles.

2 pcs in stock, estimated delivery: July 22 - 27.

$ 48.5

5x

Venox Q35–1 medium desiccant filter for Venox Pocket Air CS1-I, Venox 12V and Venox Kratos Air CS4-I compressors. Inside its metal construction is a granulate and foam cartridge.

> 100 pcs in stock, estimated delivery: July 22 - 27.

$ 37.2

3x

Spare magazine for the PCP airgun Umarex Iconix in 4,5 mm caliber with capacity of 10 pellets. 

1 pcs in stock, estimated delivery: July 22 - 27.

$ 17.2

2x

Adapter with two 1/2UNF external threads allowing you to install a sound moderator onto the airgun barrel with an internal thread.

13 pcs in stock, estimated delivery: July 22 - 27.

$ 29.3

Set of spare parts for the Umarex T4E TC 68 RAM rifle. Includes a set of o-rings, a valve, and washers.

6 pcs in stock, estimated delivery: July 22 - 27.

$ 18.4

3x

Desiccant filter with one spare refill kit for HILL EC-3000 EVO compressor. The manufacturer recommends replacement every 3 months, or after every 10 hours of operation.

12 pcs in stock, estimated delivery: July 22 - 27.

$ 127.3

2x

A standard pressure hose for PCP hand pumps (Hill, FX, etc.) with 1/8 BSP male thread and 450 mm overall length.

9 pcs in stock, estimated delivery: July 22 - 27.

$ 18.4

1x

Spare filling pin with classic Foster quick disconnect coupler for all Epic Airguns rifles.

5 pcs in stock, estimated delivery: July 22 - 27.

$ 18.4

1x

The spare magazine for Gamo PT-85 air pistols. This model has a capacity of 8 pellets in .177 caliber (4,5 mm).

3 pcs in stock, estimated delivery: July 22 - 27.

$ 10.9

2x

Italian manufacturer Negrini has a tradition in the production of plastic cases of a high quality. Case is Intended for two long rifles. The interior of the case is padded.

2 pcs in stock, estimated delivery: July 22 - 27.

$ 69.5

9x

The spare magazine and pellet belts for Sig Sauer MCX/MPX airguns. The package contains three pellet belts and a polymer magazine.

23 pcs in stock, estimated delivery: July 22 - 27.

$ 43.2

Spare magazine for the Umarex Notos airgun in 4,5mm caliber with a capacity of 9 rounds.

In Stock, estimated delivery: July 23 - 27.

$ 17.6

5x

This set of 10 paper targets is ideal for zeroing your scope or the Benchrest shooting competition. Each sheet has a size of 40 cm x 30 cm.

> 50 pcs in stock, estimated delivery: July 22 - 27.

$ 2.6

4x

Venox Knockdown target in the shape of a zombie. This model is ideal for recreational shooting and accuracy training. The size of the killzone can be adjusted for increased difficulty and range (15, 25 and 40 meters).

11 pcs in stock, estimated delivery: July 22 - 27.

$ 22.1

14x

The Venox shooting table is designed for accurate and comfortable shooting and can also be used during the sights and scope setup. The practical mounting made of flexible material allows the attachment of a wide range of weapons. The seat is variable, so you can adjust the height and distance to feel comfortable while shooting.

> 50 pcs in stock, estimated delivery: July 22 - 27.

$ 112.3

3x

The barrel extension for ASG TAC CO2 air rifles. This model will give your rifle a tactical look. The lower part of this model has a horizontal flat cut to accommodate the laser sight.

10 pcs in stock, estimated delivery: July 22 - 27.

$ 4.9

7x

Ambidextrous belt holster with two belt loops and an integrated case for magazine. Designed for weapons with a bigger frame: CZ 75/85, GLOCK 17, Beretta 92, Sig P226.

4 pcs in stock, estimated delivery: July 22 - 27.

$ 16.1

1x

Figure targets have dimensions of 840×590mm.

3 pcs in stock, estimated delivery: July 22 - 27.

$ 15.8

1x

All o-rings listed in the Kalibrgun Cricket datasheet can be replaced with this o-ring kit. The set includes rings for all calibers.

3 pcs in stock, estimated delivery: July 22 - 27.

$ 9.4

1x

Service pack for Glock 17 Gen5 Diabolo 4,5 mm magazine. Set includes 2× o-ring, ammo belt, 2× valve seals, piercer seal and magazine ejector spring. 

3 pcs in stock, estimated delivery: July 22 - 27.

$ 17.6

Spare piston spring for Slavia 634 air rifle.

24 pcs in stock, estimated delivery: July 22 - 27.

$ 13.9

4x

The holster is made of durable impact resistant polymer and has a clip for placing a spare magazine. The holster clips to your belt so your Umarex T4E HDR 68/TR 68 RAM revolver will always be ready for defense and fun.

6 pcs in stock, estimated delivery: July 22 - 27.

$ 24.8

4x

This magazine is designed for the Umarex T4E Smith & Wesson M&P9c M2.0 RAM pistol. It has a capacity of eight .43 caliber rubber projectiles. The cap on the bottom of the magazine will allow you to pierce the CO2 cartridge.

4 pcs in stock, estimated delivery: July 22 - 27.

$ 71.0

2x

This magazine is designed for the Umarex T4E Walther PPQ RAM pistol. It has a capacity of eight .43 caliber rubber projectiles. The cap on the bottom of the magazine will allow you to pierce the CO2 cartridge which can be stored inside the mag.

7 pcs in stock, estimated delivery: July 22 - 27.

$ 71.0

2x

This service kit is designed for the Umarex T4E HDS 68 RAM shotgun. It contains spare seals and the cartridge piercer.

2 pcs in stock, estimated delivery: July 22 - 27.

$ 26.3

13x

Durable Venox bipod made from aluminum alloy with adjustable legs. They have a maximal length of 22 cm and can also be set to one of 5 preset lengths. This model has an adapter for 11 mm and 22 mm rail with sling swivel stud.

33 pcs in stock, estimated delivery: July 22 - 27.

$ 63.5

Complete set of all sealing rings for FX DRS air rifles in 5,5mm and 6,35mm caliber.

33 pcs in stock, estimated delivery: July 22 - 27.

$ 33.4

1x

Altaros filling hose for filling windsocks from a diving bottle with a standard G5/8 thread. It includes a pressure gauge with a scale up to 400 bar and a working pressure up to 320 bar and a 1/8" BSP quick coupling.

15 pcs in stock, estimated delivery: July 22 - 27.

$ 69.1

1x

Package of 10 paper targets with silhouettes of 4 ducks. Four central targets are located in the areas of their hearts and additional four small targets can be found on the sides. This model is ideal for recreational shooting.

In Stock, estimated delivery: July 23 - 27.

$ 2.6

3x

Donny FL TANTO is a compact sound moderator for PCP air rifles. It can be used with all calibers from .177 (4,5mm) to .22 (5,5mm). You can screw it to the muzzle with the 1/2×20 UNF thread. It has an overall length of 12,7 cm.

1 pcs in stock, estimated delivery: July 22 - 27.

$ 107.1

2x

Bipod with Picatinny mounting, swivel stud adapter and the possibility to drill your own swivel stud into the stock. The folding legs have length adjustment from 16–18 cm and are finished with roughened boots.

2 pcs in stock, estimated delivery: July 22 - 27.

$ 33.4

Compressor with filling pressure of up to 310 bar ideal for anyone who wants to be 100% independent in PCP airgun filling.

9 pcs in stock, estimated delivery: July 22 - 27.

$ 1 126.6

2x

This mainspring is designed for Kral Arms N-01/05/06/08/12 break barrel air rifles. The energy of the spring does not exceed 16 J.

> 100 pcs in stock, estimated delivery: July 22 - 27.

$ 10.9