Snowpeak T-Rex is a full‑power PCP air rifle fitted with a polymer stock with a mostly smooth surface complemented by textured zones and cut-outs at the grip points to ensure maximum stability when shooting. The stock itself is equipped with a vertically adjustable cheekpiece and a rubber buttpad with recoil-absorbing properties. On the fore-end there is a bottom Picatinny mounting rail allowing the attachment of a bipod or other shooting accessories.
The internal system of the air rifle is powered by compressed air stored in a classic air cylinder with a working pressure of 250 Bar and a volume of 230 cm3. The cylinder is filled via a quickfill adapter, which must be additionally equipped with a quick coupler to connect it to the hose. The current pressure level can be monitored on the analogue manometer located at the front of the cylinder. A built‑in regulator takes care of stable air delivery during shooting.
Shooting is operated by a sliding four‑stroke bolt, whose handle can be mounted on either the right or left side. The bolt is first unlocked, then pulled back; by pushing it forward again and locking it, the pellet is fed from the 9‑shot magazine directly into the barrel. The presence of a pellet in the chamber is indicated by a tactile indicator located at the rear of the block and further highlighted in red. To increase safety, the system can be secured between shots with a manual safety.
Accurate aiming is provided by iron sights – a fixed front sight and a rear sight adjustable vertically and horizontally. For optional optics mounting, Snowpeak has also provided a top Weaver/Picatinny mounting rail.
The precise rifled barrel with shroud has a length of 480mm and is finished with a sound moderator for maximally quiet shooting.
The air rifle comes complete with spare O‑rings, Allen keys, a quickfill adapter and one magazine.
WARNING! The regulator on this calibre is factory set to 150 bar. Shooting below this pressure level may cause damage to the regulator and consequently air leaks in the gun. When the pressure reaches 150 bar, we therefore recommend refilling the cylinder.