Spare Parts page 6 from 12

This spare air cylinder is designed for the Evanix Cloud Ultra PCP air rifle.

5 pcs in stock, estimated delivery: July 9 - 13.

$ 259.2

This carbon fiber bottle is designed for the Evanix REX-FA and IBEX PCP air rifles. It has a capacity of 480 ccm and you can check the current pressure on the pressure gauge on the top of the valve. The outer surface of the bottle is covered by a synthetic buttstock with a buttpad.

7 pcs in stock, estimated delivery: July 9 - 13.

$ 450.4

Mounting platform with Arca-Swiss, UIT and Picatinny rails and side M-LOK slots for EPIC TWO air rifles with 300cc carbon cartridge.

In Stock in Our Central Warehouse, estimated delivery: July 15 - 20.

$ 279.9

FX Airguns adapter allowing the use of FX Airguns air bottles on AGN Vulcan 3 air rifles. Additionally, thanks to the presence of a check valve, there is no air loss when replacing them.

2 pcs in stock, estimated delivery: July 9 - 13.

$ 33.4

This carbon fiber air cylinder is designed for FX Impact M3, FX Crown, FX Royale and FX Dreamline (adapter needed) PCP air rifles. It has a capacity of 300cc and 300bar working pressure.

5 pcs in stock, estimated delivery: July 9 - 13.

$ 315.6

Replacement Power Plenum HP (High-Power) for FX DRS air rifles with barrel lengths of 500 mm and 600 mm.

2 pcs in stock, estimated delivery: July 9 - 13.

$ 89.8

A tuning cheekpiece designed for FX Impact, Impact MkII, and Impact M3 air rifles, allowing comfortable shooting for both right-handed and left-handed shooters.

3 pcs in stock, estimated delivery: July 9 - 13.

$ 47.3

Conversion kit enabling the use of high capacity Hi-Cap Side Shot magazines in FX Impact air rifles (pre-MkII versions).

2 pcs in stock, estimated delivery: July 9 - 13.

$ 29.7

This kit will allow you to attach the side lever to the left or right side of the rifle. This will make your FX Impact fully ambidextrous. The kit is compatible with FX Impact MKI, MKII and M3.

2 pcs in stock, estimated delivery: July 9 - 13.

$ 152.9

This Nielsen pellet probe was designed for the FX Impact PCP air rifle in .25 caliber (6,35 mm).

1 pcs in stock, estimated delivery: July 9 - 13.

$ 32.6

Hinged joint allowing you to install any AR-type stock onto your FX Panthera airgun (version with underbarrel cartridge).

19 pcs in stock, estimated delivery: July 9 - 13.

$ 71.0

FX weight with a length of 90 mm and a weight of 250 g for mounting on barrels of FX air rifles Panthera, Dynamic, and King. Two hex screws are used to secure it.

2 pcs in stock, estimated delivery: July 9 - 13.

$ 29.7

FX STX Superior is the successor of the FX STX Liner Slug A series of spare barrel liners. This is the Heavy version and it has a special twist rate which was especially designed for heavy pellets and slugs.

2 pcs in stock, estimated delivery: July 9 - 13.

$ 106.7

FX STX Superior is the successor of the FX STX Liner Slug A series of spare barrel liners. This is the Standard version and it has a special twist rate which was especially designed for standard pellets and lighter slugs.

1 pcs in stock, estimated delivery: July 9 - 13.

$ 108.6

FX STX Superior is the successor of the FX STX Liner Slug A series of spare barrel liners. This is the Standard version and it has a special twist rate which was especially designed for standard pellets and lighter slugs.

2 pcs in stock, estimated delivery: July 9 - 13.

$ 108.6

The spare FX STX Tube for the FX Wildcat MKII PCP air rifle in .22 caliber (5,5 mm).

1 pcs in stock, estimated delivery: July 9 - 13.

$ 262.6

Folding stock adaptor for the tactical configuration of the FX Dreamline air rifle. Improves portability and maintains a stable connection between the stock and the weapon body.

11 pcs in stock, estimated delivery: July 9 - 13.

$ 86.0

1x

Spare grip for CO2 air pistol SPA CP2 with a camouflage pattern.

2 pcs in stock, estimated delivery: July 9 - 13.

$ 18.4

Spare grip for PCP air rifle M50 from a Chinese manufacturer SPA.

1 pcs in stock, estimated delivery: July 9 - 13.

$ 22.2

Hatsan Vortex Gas Piston Type 4 can be used to replace the regular spring piston on Hatsan air rifles. With this model you can expect more manageable recoil, much less noise and you can shoot more smoothly and comfortably.

6 pcs in stock, estimated delivery: July 9 - 13.

$ 37.5

Hatsan Vortex Gas Piston Type 5 will give you more stable performance and increase the lifespan of your airgun. It can be used to replace the regular spring piston on Hatsan air rifles.

3 pcs in stock, estimated delivery: July 9 - 13.

$ 37.5

The high flow tuning pellet probe with a pin tip is designed for FX DRS air rifles and allows for maximum airflow. It is suitable for both slugs and pellets.

1 pcs in stock, estimated delivery: July 9 - 13.

$ 26.3

The high flow tuning pellet probe with a pin tip is designed for FX DRS air rifles and allows for maximum airflow. It is suitable for both slugs and pellets.

2 pcs in stock, estimated delivery: July 9 - 13.

$ 26.3

The high flow tuning pellet probe with a pin tip is designed for FX Panthera/Dyna­mic/King air rifles and allows for maximum airflow. It is suitable for both slugs and pellets.

1 pcs in stock, estimated delivery: July 9 - 13.

$ 26.3

The high flow tuning pellet probe with a pin tip is designed for FX Panthera/Dyna­mic/King air rifles and allows for maximum airflow. It is suitable for both slugs and pellets.

4 pcs in stock, estimated delivery: July 9 - 13.

$ 26.3

High Flow probe for FX Impact 5,5mm calibre suitable for shooting with pellets and slugs.

6 pcs in stock, estimated delivery: July 9 - 13.

$ 29.7

High Flow probe for FX Impact 6,35mm calibre suitable for shooting with pellets and slugs.

6 pcs in stock, estimated delivery: July 9 - 13.

$ 25.9

The tuning pellet probe with an enlarged passage hole allows maximum airflow, and thus maximum performance, which is desirable when shooting heavy slugs.

1 pcs in stock, estimated delivery: July 9 - 13.

$ 23.5

The tuning pellet probe with an enlarged passage hole allows for maximum airflow, and thus maximum performance, which is desirable when shooting heavy slugs.

1 pcs in stock, estimated delivery: July 9 - 13.

$ 23.5

The spare High-flow valve designed for Evanix REX FA PCP air rifle in .30 caliber (7,62 mm).

3 pcs in stock, estimated delivery: July 9 - 13.

$ 71.0

Standard pistol grip from the American manufacturer HOGUE for AR-15/M16 weapon platforms and EPIC TWO air rifles.

4 pcs in stock, estimated delivery: July 9 - 13.

$ 47.0

1x

Standard pistol grip from the American manufacturer HOGUE for AR-15/M16 weapon platforms and EPIC TWO air rifles.

In Stock in Our Central Warehouse, estimated delivery: July 15 - 20.

$ 47.0

A high-quality polymer buttstock from US manufacturer Hogue for the AR-15 family of rifles. This model is compatible with Mil-Spec buffer tubes (29,21 mm tube diameter).

2 pcs in stock, estimated delivery: July 9 - 13.

$ 101.1

1x

A high-quality collapsible buttstock from US manufacturer Hogue for the AR-15 family of rifles. This model comes with a Mil-Spec buffer tube (29,21 mm tube diameter).

2 pcs in stock, estimated delivery: July 9 - 13.

$ 183.7

Conversion kit allowing the connection of a second air cartridge to the front of the FX Panthera air rifle. Ideal accessory when setting the air rifle for high performance.

3 pcs in stock, estimated delivery: July 9 - 13.

$ 93.5

Externally adjustable regulator for EPIC TWO air rifles with output pressure up to 175 bar, ensuring excellent consistency even at high power settings.

1 pcs in stock, estimated delivery: July 9 - 13.

$ 123.6