Snowpeak T-Rex W is a full-power PCP air rifle fitted with a wooden stock with a mostly smooth surface complemented by textured zones and cut-outs at the gripping points to ensure maximum stability when shooting. The stock itself is equipped with an ergonomic cheekpiece and a rubber butt pad with damping properties. On the forearm there is a bottom Picatinny mounting rail allowing the attachment of a bipod or other shooting accessories.
The internal system of the air rifle is powered by compressed air stored in a classic air cylinder with a working pressure of 250 Bar and a volume of 230 cm3. The cylinder is filled via a quickfill adapter, which must be additionally fitted with a quick coupler to connect it to the hose. The current pressure level can be monitored on the analog pressure gauge located at the front of the cylinder. A built-in regulator ensures stable dosing during shooting.
Shooting is carried out using a sliding four-stroke bolt, whose handle can be mounted on either the right or left side. The bolt is first unlocked, then pulled back, and by pushing it forward again and locking it, the pellet is transferred from the 9-shot magazine directly into the barrel. The presence of a pellet in the chamber is indicated by a tactile indicator on the rear of the block, additionally highlighted in red. To increase safety, the system can be secured between individual shots with a manual safety.
Accurate aiming is provided by iron sights – a fixed front sight and a rear sight adjustable vertically and horizontally. For optional optics mounting, Snowpeak has also prepared a top Weaver/Picatinny mounting rail.
The precise rifled barrel with shroud has a length of 530mm and is finished with a sound moderator for maximally quiet shooting.
The air rifle is supplied with spare O-rings, Allen keys, a quickfill adapter and one magazine.
Attention, the regulator on this calibre is set to 130 bar. Avoid letting the pressure drop below this level, as this could damage the internal seals and cause the rifle to leak.