Pressure Regulator for Hatsan AT44 and Bullboss
Pressure regulator for Hatsan AT44 and Bullboss PCP air rifles. The installation
is really simple and straightforward. The pressure output can be adjusted with
the flat head screwdriver from 100 to 150 bar.
3 pcs in stock,
Estimated Delivery:
April 24 - 26.
€ 87.6
Purchasing this item will give you 70 Loyalty Pellets. Find out more about Balistas Club
- Warranty:
- 24 Months
- Manufacturer:
- Altaros
- EAN:
- 202020100298
- Item ID:
- CA-RE-018-001
Experts on Airguns, Archery, Hunting and Outdoor Gear 100% Warranty of Satisfactory Purchase
PRODUCT DESCRIPTION
Pressure regulator for Hatsan AT44 and Bullboss PCP air rifles. This device will give you more consistent performance and improved accuracy.
The installation is really simple and straightforward. First you need to drain the air cylinder of any air and unscrew it. Then unscrew the brass cap with valve from the air cylinder and insert the regulator into the air cylinder and screw the brass cap back. All you need to do next is to screw the air cylinder back to the frame of the rifle.
You can still use the Quick-Fill adapter, that comes with your rifle even if you have the regulator installed.
The pressure output can be adjusted with the flat head screwdriver from 100 to 150 bar. The total scale range corresponds to approximately 2/3 turn. Unscrewing, or screwing the setting screw for more than one turn may result in failure of the regulation. To increase the pressure you need to turn the setting screw counterclockwise. To decrease the pressure you must turn it clockwise.
Video (video is illustrative only):
Package contents
- sure Regulator for Hatsan AT44 and Bullboss Spare o-rings - 2pcs.
Customer Reviews (0)
Be the first one to rate this product and help others decide.
By submitting your review, you are agreeing to our review guidelines. It will be published once we make sure it corresponds with our terms and conditions.