EPIC TWO LITE CFB 300mm 6,35mm

The Czech company EPIC AIRGUNS has gained worldwide fame for producing top-of-the-line PCP air rifles, specifically the ONE and TWO models, whether in classic tactical design or with a beautiful walnut stock. However, due to their perfect workmanship and premium materials, these pieces were quite heavy and priced on the higher end. The solution comes in the form of the new EPIC TWO LITE air rifle.

The LITE model is lighter, cheaper, but just as high-quality as its older sibling, the EPIC TWO. All this is thanks to the replacement of the original CNC-machined aluminium stock with a new AR-15-type stock (and yes, you can replace it with any other AR-15-standard stock). This high-quality polymer stock is length-adjustable and finished with a comfortable rubber buttpad.

The classic cartridge version has undergone one more change – instead of the extended Arca-Swiss bottom rail, it now features a short Picatinny rail.

All other components remain intact. The non-choked CZUB barrel with 12 grooves and 17.7" twist rate is outfitted with a carbon shroud, which also doubles as the barrel pretensioner (harmonic tuning). The muzzle end features a reduction to 1/2UNF thread for installation of any sound moderator. By removing the reducer you will expose the M27x1 thread, onto which you can mount the original Epic Airguns moderator or muzzle brake.

With the barrel kit you can easily convert the barrel length and the complete airgun caliber. The set includes everything necessary (barrel, carbon shroud with M27x1 thread, 1/2UNF adapter, 1/2UNF thread cover, transfer port and pellet probe).

For best results with heavy pellets and slugs, there is also a barrel kit with a non-choked Lothar Walther polygonal barrel (6 grooves with 17.7" twist rate).

EPIC TWO air rifles feature an adjustable balanced valve, which ensures maximum performance at minimum hammer spring tension, making it easier to cock the charging lever. At the same time, it reduces wasted air, increasing the number of shots per fill. The hammer spring tension can be adjusted externally via a screw located right behind the cocking lever.

The cartridge can be filled to a maximum working pressure of up to 300 bar (4350 PSI) using the supplied 1/8" diameter filling pin compatible with standard quick couplers. The air rifle is fitted with 2 pressure gauges. The first one indicates the current pressure in the cartridge, the second one indicates the pressure in the externally adjustable regulator.

Riflescope can be mounted onto the standard 22mm Picatinny rail canted by 30 MOA, helping to adjust the scope for shooting at the greatest distances. And of course there is a fully adjustable trigger and comfortably positioned manual safety on the right side.

The EPIC TWO LITE model is available in the following configurations:

• LITE - standard aluminium cartridge (95 cc with 300 mm barrel, 240 cc with 550 mm barrel)
• LITE CFB – carbon fiber bottle (300 cc with 300 mm barrel, 580 cc with 550 mm barrel)

NOTE: The EPIC TWO externally adjustable regulator is designed to operate from 40-190 BAR.

Exceeding the maximum pressure of the regulator may result in damage to the regulator.

WARNING: When decreasing the regulator pressure, only rotate the screw by 1/4 turn at a time and perform 2 to 3 blank shots into a safe area. Repeat this step until you reach the desired regulator pressure. Failing to follow this procedure may damage the internal regulator o-rings!

It is recommended to adjust the hammer spring tension according to the set pressure on the regulator, otherwise it may cause inconsistent shots.

Please refer to the manual supplied with each air rifle for more information.