Weapons from Huma-Air

1x

Complete set of O-rings identical to the factory drawing for the FX DRS air rifle.

2 pcs in stock, estimated delivery: June 2 - 5.

$ 12.2

1x

Adjustable regulator 70–150 bar for PCP air rifles SPA / Snowpeak P10, M16, T-Rex, AP900, and AP1000.

4 pcs in stock, estimated delivery: June 2 - 5.

$ 101.1

1x

All o-rings listed in the Kalibrgun Cricket datasheet can be replaced with this o-ring kit. The set includes rings for all calibers.

8 pcs in stock, estimated delivery: June 2 - 5.

$ 9.4

The Huma-Air Gen 3 tuning regulator with a range of 135–200 bar is suitable for FX DRS, Impact (I, MkII, M3, M4), Panthera, Dynamic, King, Crown, Dreamline, Maverick and Wildcat MkIII airguns.

5 pcs in stock, estimated delivery: June 2 - 5.

$ 101.1

Huma filling pin designed for PCP air rifles Gamo and BSA. Thanks to the standardized interface, it can be easily connected to most quick-connect fittings used in common filling setups.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 14.1

1x

All o-rings listed in the FX Barrelkit for Impact/Maveric­k/Wildcat MKIII datasheet can be replaced with this o-ring kit. The set includes rings for all calibers.

4 pcs in stock, estimated delivery: June 2 - 5.

$ 9.4

High flow transfer port with middle support bridge for maximum air flow. Fits FX Impact, FX Dreamline, FX Crown, Maverick and Wildcat MKIII caliber 6,35mm models.

2 pcs in stock, estimated delivery: June 2 - 5.

$ 31.6

All sealing rings listed in the FX Crown datasheet can be replaced with this seal ring kit. The set includes rings for all calibers.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 9.4

All o-rings listed in the FX Dreamline datasheet can be replaced with this o-ring kit. The set includes rings for all calibers.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 9.4

Tuning regulator ensuring better accuracy of your Katran thanks to maintaining consistent airflow without any fluctuations.

4 pcs in stock, estimated delivery: June 2 - 5.

$ 101.1

Filling pin for AGN Uragan 2/3 air rifles with a fitting for a classic 1/8 BSP quick connector. The construction is made from a single piece of stainless steel and can withstand a filling pressure of up to 300 bars.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 13.6

All o-rings listed in the Benjamin Marauder datasheet can be replaced with this o-ring kit. The set includes rings for all calibers.

2 pcs in stock, estimated delivery: June 2 - 5.

$ 9.4

1x

Power tune kit for FX Impact 5.5mm air rifles optimized for pellets.

4 pcs in stock, estimated delivery: June 2 - 5.

$ 67.2

This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for the Kral Arms Puncher Jumbo PCP air rifle. It will allow you to get much more consistent performance and improved accuracy.

5 pcs in stock, estimated delivery: June 2 - 5.

$ 168.7

All o-rings listed in the Edgun Leshiy I datasheet can be replaced with this o-ring kit. The set includes rings for all calibers.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 9.4

This adapter allows the use of any air bottle with an M18×1.5 thread on the AGN Technology Vixen air rifle.

2 pcs in stock, estimated delivery: June 2 - 5.

$ 37.6

The AirMaks Krait MKIII regulator is the result of a collaboration between the Huma-Air and AirMaks brands and is designed for use in the third generation monoblock of Krait air rifles. The output pressure can be adjusted within the range of 100–170 Bar.

2 pcs in stock, estimated delivery: June 2 - 5.

$ 112.7

This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for SPA Artemis PR900W and PP800 PCP air rifles. It will allow you to get much more consistent performance and improved accuracy.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 101.1

Lightweight and durable magazine holder for Eagle Vision for AGN Uragan III, mounts on a Picatinny rail and offers quick access to spare magazines.

2 pcs in stock, estimated delivery: June 2 - 5.

$ 40.9

1x

This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for Edgun Matador R5M and Edgun Lelya 2.0 PCP air rifles. It will allow you to get more consistent performance and improved accuracy.

3 pcs in stock, estimated delivery: June 2 - 5.

$ 118.3

This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for the Evanix Air Speed PCP air rifle in .177 (4,5 mm) and .22 (5,5 mm). It will allow you to get much more consistent performance and improved accuracy.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 104.8

The tuning regulator for the Evanix Airspeed in 6.35 mm / .25 calibre offers long-term shot consistency, but it is recommended to maintain a time gap of about 3–4 seconds between the shots. The pressure is adjustable in the range of 90–170 bar.

2 pcs in stock, estimated delivery: June 2 - 5.

$ 101.1

The external regulator for Airgun Technology Uragan third generation air rifles serves as a direct replacement for the factory regulator and allows external pressure adjustment in the range of 100–200 bars.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 124.9

FX Airguns adapter allowing the use of FX Airguns air bottles on AGN Vulcan 3 air rifles. Additionally, thanks to the presence of a check valve, there is no air loss when replacing them.

2 pcs in stock, estimated delivery: June 2 - 5.

$ 33.4

Tuning power plenum with increased volume of 30cc allowing your FX Wildcat airgun to achieve better performance.

2 pcs in stock, estimated delivery: June 2 - 5.

$ 28.2

Tuning set of FX hammer pins (1×13.2, 1×14.5g) for achieving maximum performance in FX air rifles.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 18.8

The high flow tuning pellet probe with a pin tip is designed for FX DRS air rifles and allows for maximum airflow. It is suitable for both slugs and pellets.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 26.3

The high flow tuning pellet probe with a pin tip is designed for FX DRS air rifles and allows for maximum airflow. It is suitable for both slugs and pellets.

2 pcs in stock, estimated delivery: June 2 - 5.

$ 26.3

The high flow tuning pellet probe with a pin tip is designed for FX Panthera/Dyna­mic/King air rifles and allows for maximum airflow. It is suitable for both slugs and pellets.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 26.3

The high flow tuning pellet probe with a pin tip is designed for FX Panthera/Dyna­mic/King air rifles and allows for maximum airflow. It is suitable for both slugs and pellets.

4 pcs in stock, estimated delivery: June 2 - 5.

$ 26.3

High Flow probe for FX Impact 5,5mm calibre suitable for shooting with pellets and slugs.

6 pcs in stock, estimated delivery: June 2 - 5.

$ 29.7

High Flow probe for FX Impact 6,35mm calibre suitable for shooting with pellets and slugs.

6 pcs in stock, estimated delivery: June 2 - 5.

$ 25.9

The tuning transfer port for FX DRS air rifles caliber 5.5 mm (.22) with an enlarged passage hole allows for maximum and smoother air flow, resulting in greater performance.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 51.7

Tuning transfer port for FX DRS .25 caliber (6.35 mm) air rifles with an enlarged passage hole allows for maximum and smoother airflow, thereby increasing power.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 51.7

The tuning pellet probe with an enlarged passage hole allows maximum airflow, and thus maximum performance, which is desirable when shooting heavy slugs.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 23.5

The tuning pellet probe with an enlarged passage hole allows for maximum airflow, and thus maximum performance, which is desirable when shooting heavy slugs.

1 pcs in stock, estimated delivery: June 2 - 5.

$ 23.5