Seal washer USIT 5pcs
USIT seal washer compatible with 1/8″ BSP male thread.
> 100 pcs in stock, estimated delivery: May 10 - 13.
$ 0.5
skip_main skip_menu skip_search
Mirka Customer Support
Your cart is empty
Add the chosen goods to your cart. Are you wondering where to begin?
Take a look at bestsellers our visit our help room.
Do you have any question?
Michal
Call us +420 773 379 767, 11PM–7AM (PT), MON–FRI
Contact us info@balistas.com
show 1–36 of 73
USIT seal washer compatible with 1/8″ BSP male thread.
> 100 pcs in stock, estimated delivery: May 10 - 13.
$ 0.5
Adapter 1/8 BSP male/male to connect two female fittings.
> 20 pcs in stock, estimated delivery: May 10 - 13.
$ 3.9
This protective burst disc has the 3/8 UNF thread form and is rated for
1800 psi standard low pressure side paintball regulators.
9 pcs in stock, estimated delivery: May 10 - 13.
$ 6.4
This protective burst disc has the 3/8 UNF thread form and is rated for 3000psi
(206 bar) standard high pressure side paintball tank regulators.
8 pcs in stock, estimated delivery: May 10 - 13.
$ 6.4
This protective burst disc has the 3/8 UNF thread form and is rated for 4500psi
(310 bar) standard high pressure side paintball tank regulators.
6 pcs in stock, estimated delivery: May 10 - 13.
$ 6.4
Best Fittings polymer cap effectively protects the male 1/8 BSP PCP airguns'
quick disconnect coupling.
6 pcs in stock, estimated delivery: May 10 - 13.
$ 6.8
All o-rings listed in the Benjamin Marauder datasheet can be replaced with this
o-ring kit. The set includes rings for all calibers.
2 pcs in stock, estimated delivery: May 10 - 13.
$ 9.0
All sealing rings listed in the FX Crown datasheet can be replaced with this
seal ring kit. The set includes rings for all calibers.
1 pcs in stock, estimated delivery: May 10 - 13.
$ 9.0
All sealing rings listed in the FX Maverick datasheet can be replaced with this
seal ring kit. The set includes rings for all calibers.
5 pcs in stock, estimated delivery: May 10 - 13.
$ 9.0
All o-rings listed in the FX Barrelkit for Impact/Maverick/Wildcat MKIII
datasheet can be replaced with this o-ring kit. The set includes rings for all
calibers.
10 pcs in stock, estimated delivery: May 10 - 13.
$ 9.0
All o-rings listed in the Kalibrgun Cricket datasheet can be replaced with this
o-ring kit. The set includes rings for all calibers.
3 pcs in stock, estimated delivery: May 10 - 13.
$ 9.0
Protective sleeve for both aluminium and carbon bottles from BEST Fittings. It
fits all 50/60mm diameter bottles with capacities of up to 500cc.
13 pcs in stock, estimated delivery: May 10 - 13.
$ 9.3
Adapter for Sig Sauer P226 air pistol allowing you to mount a noise moderator
with 1/2″ UNF female thread. The adapter comes complete with a protective
threaded end cap.
> 20 pcs in stock, estimated delivery: May 10 - 13.
$ 17.2
A standard pressure hose for PCP hand pumps (Hill, FX, etc.) with 1/8 BSP male
thread and 450 mm overall length.
> 20 pcs in stock, estimated delivery: May 10 - 13.
$ 17.6
Filling adapter male 1/8" BSP with glued sealing washer for easy filling of
cartridges in PCP airguns.
17 pcs in stock, estimated delivery: May 10 - 13.
$ 17.6
7x
This PCP airgun refill kit offers a quick adapter exchange. It is compatible
with all filling adapters with 1/8″ BSP male thread and hoses with 1/8″ BSP
female thread.
> 20 pcs in stock, estimated delivery: May 10 - 13.
$ 21.1
Adapter for mounting the 1/2×20 UNF noise moderator on the SPA Artemis
PP700S-A air pistol.
19 pcs in stock, estimated delivery: May 10 - 13.
$ 21.1
Wrench for installation / removal of FX Airguns bottle valve
1 pcs in stock, estimated delivery: May 10 - 13.
$ 22.2
High Flow probe for FX Impact 5,5mm calibre suitable for shooting with pellets
and slugs.
2 pcs in stock, estimated delivery: May 10 - 13.
$ 24.7
Adapter for mounting a 1/2×20 UNF noise moderator on a SIG Sauer MPX air gun.
19 pcs in stock, estimated delivery: May 10 - 13.
$ 25.8
Adapter for mounting the 1/2×20 UNF noise moderator on the SPA Artemis PP700W
air pistol.
13 pcs in stock, estimated delivery: May 10 - 13.
$ 25.8
Tuning power plenum with increased volume of 30cc allowing your FX Wildcat
airgun to achieve better performance.
1 pcs in stock, estimated delivery: May 10 - 13.
$ 26.9
Adapter used to convert 850 Air Magnum to a standard paintball or regulated
HPA tank.
8 pcs in stock, estimated delivery: May 10 - 13.
$ 28.3
Adapter for converting CO2 airguns Sig Sauer MCX and Sig Sauer MPX into PCP
airguns powered by compressed air.
> 20 pcs in stock, estimated delivery: May 10 - 13.
$ 28.3
Butt stock plate for 60 mm diameter bottles, for example for 400 or 500 cc
bottles.
9 pcs in stock, estimated delivery: May 10 - 13.
$ 42.6
Power tune kit for FX Impact 5.5mm air rifles optimized for pellets.
1 pcs in stock, estimated delivery: May 10 - 13.
$ 48.4
Power tune kit for FX Impact 6,35mm air rifles optimized for pellets.
1 pcs in stock, estimated delivery: May 10 - 13.
$ 48.4
This conversion kit allows you to achieve maximum performance with the FX Impact
air rifle in 9mm (.35), which is very beneficial when shooting heavy slugs at
long distances. The kit is also suitable for conventional heavy pellets.
2 pcs in stock, estimated delivery: May 10 - 13.
$ 82.0
This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for
the Air Arms HFT 500 PCP air rifle in .177 (4,5 mm) and .22 (5,5 mm)
calibers. It is set to the range of 100 bar – 170 bar.
1 pcs in stock, estimated delivery: May 10 - 13.
$ 96.4
This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for
the Air Arms HFT 500 PCP air rifle in .177 (4,5 mm) and .22 (5,5 mm)
calibers. It is set to the range of 60 bar – 110 bar.
1 pcs in stock, estimated delivery: May 10 - 13.
$ 96.4
This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for
SPA Artemis P10 and M16 PCP air rifles. It will allow you to get much more
consistent performance and improved accuracy.
1 pcs in stock, estimated delivery: May 10 - 13.
$ 96.4
This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for
SPA Artemis PR900W and PP800 PCP air rifles. It will allow you to get much more
consistent performance and improved accuracy.
1 pcs in stock, estimated delivery: May 10 - 13.
$ 96.4
The Benjamin Akela tuning regulator offers the highest accuracy and consistency
of shots. Compatible with all 4.5mm, 5.5mm and 6.25mm calibre models.
2 pcs in stock, estimated delivery: May 10 - 13.
$ 96.4
The tuning regulator for the Evanix Airspeed in 6.35 mm / .25 calibre offers
long-term shot consistency, but it is recommended to maintain a time gap of
about 3–4 seconds between the shots. The pressure is adjustable in the range
of 90–170 bar.
2 pcs in stock, estimated delivery: May 10 - 13.
$ 96.4
This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for
the Kalibrgun Cricket II PCP air rifle. It will allow you to get more consistent
performance and improved accuracy. It is set to the range of 100 bar –
170 bar.
2 pcs in stock, estimated delivery: May 10 - 13.
$ 96.4
This tuning pressure regulator from Dutch manufacturer Huma-Air is designed for
the Taipan Veteran PCP air rifle. It will allow you to get more consistent
performance and improved accuracy.
3 pcs in stock, estimated delivery: May 10 - 13.
$ 96.4