Set for increasing the muzzle energy of the Umarex T4E TP 50 Gen2 RAM weapon.
Disassembly of the weapon required.
Temporarily Unavailable
$ 47.0
- Secure shopping and payment
- Express delivery in 3 days
- -20% on selected product in the loyalty program
- Customers rate us 4.4/5 on Trustpilot
- Excellent customer support from specialists
- Warranty:
- 24 Months
- EAN:
- 202520100319
- Item ID:
- 53729
Similar Products
Experts on Airguns and Archery
-
Secure shopping and payment Express delivery in 3 days -
Excellent customer support from specialists – for over 15 years -
-20% on selected product in the loyalty program -
New videos and reviews every day 6000+ reviews from our customers
PRODUCT DESCRIPTION
With this kit you will increase the muzzle energy of the RAM gun Umarex T4E TP 50 Gen2 to more than 20 Joules (depending on the ammunition used). With higher energy, the shot capacity per one CO2 cartridge is reduced.
OPERATING PRINCIPLE
The Power Kit contains 2 components that must replace the original parts in the gun: the restrictor (round plate) and the valve pin (cylindrical part with thread). Thanks to the use of stainless steel, they provide better smoothness and protection of the O-rings and at the same time better resist the cooling effect of the flowing CO2 gas.
- The restrictor with a larger hole allows faster flow of CO2 gas from the cartridge into the valve.
- The modified valve pin ensures longer valve opening, so in combination with the tuning restrictor you achieve higher muzzle energy at the cost of higher air consumption.
INSTALLATION PROCEDURE
- Installation of the restrictor is simple and requires only a large flat screwdriver; first remove the original restrictor located inside the CO2 cartridge chamber and replace it with the new one.
- Installation of the valve pin requires complete disassembly of the gun. You need to heat the valve (blackened cylindrical part), preferably with a hot air gun, in which the original valve pin is screwed (it is necessary to dissolve the threadlocker). Then install the new valve pin using the supplied Allen key and reassemble the gun.
- At the same time, we recommend checking for the presence of a valve block, which is often found in weaker models. It is a metal component above the restrictor which, during disassembly of the gun, can be knocked out backwards after unscrewing the brass plate with the activation indicator.
WARNING: This modification voids the warranty on the gun!
This Product Is Listed in the Following Categories
Videos (1)
Valve Block Removal
Parameters
- Manufacturer:
- PrecisionFire
- Varianta / Typ:
- TP 50 Gen2 20J+
- Material:
- Stainless Steel
- Warranty:
- 24 Months
We also recommend buying (2)
Customer Reviews (1)
1× rated
- 1×
- 0×
- 0×
- 0×
- 0×
By submitting your review, you are agreeing to our review guidelines. It will be published once we make sure it corresponds with our terms and conditions.
