These premium Czech-made air rifles called EPIC TWO are already known worldwide thanks to their combination of high power, perfect accuracy, and full modularity. However, some shooters may not like the original aluminium stock, which is why the designers at EPIC AIRGUNS are introducing an elegant variant in a walnut wood stock.
And this is no ordinary stock – it is manufactured by the renowned Czech company KLINSKY, which has refined it down to the smallest detail. The selected wood has a unique grain, making each air rifle a kind of one-off. For the possible installation of a bipod or tripod, you can use the classic lower UIT Anschütz rail. The fore-end and grip segments are textured, and the hidden ace up its sleeve is a height-adjustable symmetrical cheekpiece and a height-, length- and side-adjustable rubber buttpad. A single H4 Allen key is sufficient for all adjustments. Compared to the original version with an aluminium stock and extended Arca-Swiss mounting platform, the Walnut version achieves a pleasantly low weight, which will be appreciated especially by hunters on long trips.

All other components remain unchanged. The unchoked CZUB barrel with 12 grooves and a 17.7" twist rate is fitted with a carbon shroud, which also serves to pre-tension it (harmonic tuning). At the muzzle there is an adapter with a 1/2UNF thread for installing any sound moderator. After removing the adapter, you reveal an M27x1 thread to which you can attach the original moderator or muzzle brake from Epic Airguns.
Thanks to the barrel kit, you can freely change the barrel length and the overall calibre of the air rifle. The set includes everything you need (barrel, carbon shroud with M27x1 thread, 1/2UNF moderator adapter, 1/2UNF thread protector, transfer port and loading probe).
To achieve the very best results with heavy pellets and slugs, a barrel kit with an unchoked polygonal Lothar Walther barrel is also available (6 grooves with a 17.7" twist rate).

EPIC TWO air rifles are equipped with an externally adjustable balanced valve, which ensures maximum power with minimal hammer spring preload, making it easier to cock the sidelever. At the same time, it reduces air waste and thus increases the shot count per fill. The hammer preload can be adjusted by a screw located behind the cocking lever.
The air cylinder with a maximum working pressure of up to 300 bar (4350 PSI) can be filled using the supplied fill probe with a classic 1/8" diameter compatible with a standard quick-coupler. There are 2 manometers on the rifle – one to indicate the current pressure in the cylinder, the other for the pressure in the externally adjustable regulator.
For mounting a riflescope, there is a standard 22 mm Picatinny rail with 30 MOA tilt, which makes it easier to zero optics for shooting at the longest distances. Naturally, there is also a fully adjustable trigger and a conveniently positioned manual safety on the right-hand side.
VARIANTS / CONFIGURATIONS
EPIC TWO Walnut air rifles are available in the following variants:
- Classic – standard aluminium cylinder (92 cc with 300 mm barrel, 240 cc with 550 and 700 mm barrel)
- CFB – carbon bottle (300 cc with 300 mm barrel, 580 cc with 550 and 700 mm barrel)

Already own an EPIC TWO air rifle? You can also purchase the walnut stock separately for the version with a standard aluminium cylinder as well as with a carbon bottle.
NOTE – The EPIC TWO air rifle offers numerous options for adjusting internal and external components, and some modifications require extensive knowledge of PCP airguns. Always follow the user manual – incorrect procedures may result in irreversible damage to the air rifle and loss of warranty.