Balistas Life Blog
How to mount and sight in a rifle scope
Learn how to mount and sight in a rifle scope, whether you are going to install it on a firearm or an air rifle. This article is intended mainly for beginner shooters.
##skip_main ##skip_menu ##skip_search
Mirka Customer Support
Your cart is empty
Add the chosen goods to your cart. Are you wondering where to begin?
Take a look at bestsellers our visit our help room.
Variable magnification rifle scopes
This riflescope from the Tauron series by the proven manufacturer Vector Optics
is equipped with an unrivalled optical system with 4–24× magnification, an
etched MPX1 reticle in the first focal plane with 6 levels of illumination, all
protected by a durable body made of 6061 T6 aircraft-grade aluminium.
8 pcs in stock,
Estimated Delivery:
August 19 - 24.
$ 300.2
Purchasing this item will give you 200 Loyalty Points. Find out more about Balistas Club
The riflescope Tauron 5-30x56 FFP MPX1 MRAD from the proven manufacturer Vector Optics is equipped with an unrivalled optical system with a 50mm objective and FMC coating, ensuring high light transmission and a clear image, allowing the riflescope to be used even in low-light conditions.
This model uses an etched MPX1 reticle located in the first focal plane (the reticle increases in size with magnification), complemented by red illumination with 6 selectable levels of brightness.
The adjustment turrets are equipped with Zero-reset and Turret Lock functions, and elevation and windage correction can be set within a range of 21/16 MRAD. On the left side of the riflescope there is a parallax adjustment turret from 20 yards to infinity combined with the turret for selecting the reticle illumination level. Power is supplied by a CR2032 battery (not included).
The turret clicks are smooth without any snagging and are accompanied by quiet clicking. The riflescope’s adjustment is specified in milliradians MRAD (also referred to as MIL) and 1 click equals 1/10 MRAD.
The durable riflescope body with protection rating IP67 is made from 6061 T6 aircraft-grade aluminium and is filled with nitrogen, which prevents lens fogging during temperature changes. The one-piece forged tube has a diameter of 30mm.
This model is capable of withstanding 1000 g (unit of gravitational acceleration), which is equivalent to the recoil of firearms in .300, .308, and .338 calibres.
Be the first one to rate this product and help others decide.
By submitting your review, you are agreeing to our review guidelines. It will be published once we make sure it corresponds with our terms and conditions.