As the name already suggests, the Rival C50 model is connected to the Turkish company Canik. This pistol is a faithful copy of the SFx firearm. The Italian company Chiappa LTL manufactures this weapon under licence from Canik as a non-lethal gun for rubber projectiles. The Chiappa LTL Canik Rival C50 features a massive metal slide and a polymer frame that at first glance are indistinguishable from the real firearm it is based on. This, however, is where all similarities end.

The pistol is designed to shoot rubber and pepper balls in calibre .50, which are inserted into a cleverly concealed magazine under the barrel. On the right side of the pistol, simply lock the follower spring, insert the balls through the opening on the underside and release the spring. The magazine has a capacity of 5 shots. As with other RAM pistols, this model is not compatible with non-spherical projectiles – there is a risk of jamming in the magazine and the gun getting stuck.
The pistol is powered by a single 12 g CO2 capsule, which is inserted into the grip after unscrewing the bottom cover / valve with pin. To activate it, simply strike or press the cover lightly with your palm, which pierces the capsule and the pistol is ready to fire. The valve is large enough to be easily tightened and loosened without tools and at the same time contributes to the realistic look of the pistol. When activated, an indicator pops up above the grip to show that the weapon is under pressure. To depressurise the pistol, simply push the indicator back in.

The Canik Rival C50 model is made from metal internal components, which are then covered by a lightweight polymer frame and a robust metal slide. The slide is fixed and fitted with fixed sights with a fibre optic insert, making aiming easier in low-light conditions. For optional installation of a laser or flashlight, there is a short Picatinny rail under the barrel, and the only safety is integrated directly into the trigger blade. The muzzle is equipped with a thread for the optional installation of a barrel extension or a sound moderator. The thread is designed only for tuning parts made by LTL and is not compatible with tuning accessories for Umarex T4E products.
NOTE: For proper magazine function we recommend applying silicone oil to the inner walls of the magazine well, or directly onto the rubber projectiles. Using dry ammunition in an unlubricated magazine may cause the weapon to jam.
Maintenance
Since the gun is powered by CO2 capsules, the rubber seals may, over time, become brittle and crack due to the freezing carbon dioxide. You can prevent this by occasionally applying silicone oil 1) in spray form, simply spraying the internal mechanism, 2) applying a few drops of silicone oil onto the neck of the inserted capsule, or 3) using an oil cartridge (the easiest method). We also do not recommend leaving an activated capsule in the gun longer than necessary. If you know you will not be shooting for a while, release the pressure by loosening the valve.