Balistas Life Blog
How to mount and sight in a rifle scope
Learn how to mount and sight in a rifle scope, whether you are going to install it on a firearm or an air rifle. This article is intended mainly for beginner shooters.
##skip_main ##skip_menu ##skip_search
Mirka Customer Support
Your cart is empty
Add the chosen goods to your cart. Are you wondering where to begin?
Take a look at bestsellers our visit our help room.
Riflescope with 6–24× magnification, etched MPX1 reticle in the second focal
plane with 6 levels of illumination, all protected by a durable 6061 T6
aircraft-grade aluminium body.
15 pcs in stock,
Estimated Delivery:
September 21 - 24.
$ 255.4
Purchasing this item will give you 170 Loyalty Points. Find out more about Balistas Club
The riflescope Tauron 6-24x50 HD HT SFP MPX1 MRAD from the proven manufacturer Vector Optics is equipped with an unrivalled optical system with a 50mm objective lens and “Diamond Fully-Multi HD” coating, ensuring high light transmission and a clear image, which allows the riflescope to be used even in low-light conditions.
This model uses an etched MPX1 reticle located in the second focal plane (the reticle does not increase in size with magnification), complemented by red illumination with 6 selectable brightness levels.
The elevation turret is equipped with a Zero-stop function, which allows you to zero the riflescope at any value below which the turret will not allow you to go. Elevation and windage adjustment can be set within a range of 19.5 MRAD. On the left side of the riflescope there is a parallax adjustment turret from 10 yards to infinity, combined with the turret for selecting the reticle illumination level. Power is supplied by a CR2032 battery (not included).
Adjusting the turrets is smooth without any sticking and is accompanied by quiet clicks. The riflescope’s adjustments are given in milliradians MRAD (also referred to as MIL) and 1 click equals 1/10 MRAD.
The durable riflescope body with protection rating IP67 is made of aircraft-grade aluminium 6061 T6 and is filled with nitrogen, which prevents lens fogging during temperature changes. The one-piece forged tube has a diameter of 30mm.
This model is capable of withstanding 1000 g (acceleration due to gravity), which is equivalent to the recoil of firearms in .300, .308 and .338 calibres.
6× rated
By submitting your review, you are agreeing to our review guidelines. It will be published once we make sure it corresponds with our terms and conditions.